Using Level 10 Carrier Assembly

[georgeyew]

Hey guys, I have a spare Minimag valve without the Level 10. Is it possible to us the Level 10 Carrier Assembly in place of the Power Tube Spacer? The reason why I ask is that I sometimes have a leak down the barrel and I have an extra Level 10 Carrier Assembly that I would like to try before purchasing replacement Power Tube Spacers. Please let me know if this will screw something up real bad. Thanks.

[pennywise]

You may be able to without the white o-rings (just use the brass spacers). It's probably worth a shot anyway.

[rb211]

Wont work. The bolt piston wont fit through the middle of the LVL 10 carrier.

[MANN]

Hey guys, I have a spare Minimag valve without the Level 10. Is it possible to us the Level 10 Carrier Assembly in place of the Power Tube Spacer? The reason why I ask is that I sometimes have a leak down the barrel and I have an extra Level 10 Carrier Assembly that I would like to try before purchasing replacement Power Tube Spacers. Please let me know if this will screw something up real bad. Thanks.

pm me your address, and which one you have/are missing. I will send you some for free.

[georgeyew]

Mann, thanks for the offer. I oiled the power tube o-ring and that stopped the leak. I appreciate the offer, that is very kind of you. I hope that I can return the generosity in the future.