New to Mags

[hoss]

I just received my Tac One. I was suprised at how lite the marker was. I am new to mags so I have a few questions.

1. The box came with a package of springs and little round thingies(I don't think thats the technical term). What are these parts and do I need to do anything with them?

2. Besides looks is there any advantage to using the gas through handle?

I hope the tac one lives up to everything that I have read. I have been shooting a cocker for years and I am looking for something a little less finnicky.

Thanks

[Greg2230]

I just received my Tac One. I was suprised at how lite the marker was. I am new to mags so I have a few questions.

1. The box came with a package of springs and little round thingies(I don't think thats the technical term). What are these parts and do I need to do anything with them?
Your marker has a level 10 bolt. These are spare springs and spacers for fine tuning. (should be tuned though) See the big level 10 guide at the automags.org homepage.

2. Besides looks is there any advantage to using the gas through handle?
No, not if you are using compressed air ( You better be) You can still run it though for looks or if you dont want hoses to get in the way.


I hope the tac one lives up to everything that I have read. I have been shooting a cocker for years and I am looking for something a little less finnicky.
You will LOVE it! Congratulations on your purchase and welcome to the Automag world

Thanks

n

[Badmovies.org]

Greg already hit the main points.

My recent RT Pro had some fine tuning needed once I received it. I was able to go one carrier size up (those are the little round parts you mention) for the Lvl 10. Also, my marker came from the factory with the shortest spring installed (the brass one) and I have found that the middle spring, the red one, is usually the best to use unless you need to chrono under 260 fps - then you will probably need to use the shortest spring.

Here is a link to the Lvl 10 guide on the front page of AO:

http://www.automags.org/resource/level10/index.shtml

In my experience, those that take up AGD markers end up loving them to death. You can do a lot of customizing, they are very simple to maintain, and they are all-around a well-made piece of gear. If you put up with taking care of an Autococker for years, the Tac One should be a very nice surprise.

[hoss]

I appreciate the help. Is the ULE trigger pull kit worth the invesment?

[Badmovies.org]

I appreciate the help. Is the ULE trigger pull kit worth the invesment?

I like it a lot. It makes the trigger a complete feather to pull. Have seen it said that using it will lower your overall bps, but I find that I shoot fast as I need to with the ULT kit.

[hoss]

Thanks again

[Mongoose]

I like it a lot. It makes the trigger a complete feather to pull. Have seen it said that using it will lower your overall bps, but I find that I shoot fast as I need to with the ULT kit.

i agree, the ULT is a must with my mags

[hoss]

i agree, the ULT is a must with my mags

Okay you've convinced me. You and the fact that I couldn't move my fingers after a day of playing with the tac-one. Any ideas where I can find a ULT?

[Tunaman]

Okay you've convinced me. You and the fact that I couldn't move my fingers after a day of playing with the tac-one. Any ideas where I can find a ULT?

I have them here. Email me at [email protected]

[Mongoose]

Okay you've convinced me. You and the fact that I couldn't move my fingers after a day of playing with the tac-one. Any ideas where I can find a ULT?

If you put up with your cocker...your gonna love the mags!
this forum has everything you need to know and more. Use the search..it helps
Also you will come across many great people that love to help.
when your ready for some customizing. Tuna and Rogue can help you out!!
Welcome to AO
Goose