pesky leaks, help!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SN toter
    yes...I had a Super Nova

    • Oct 2001
    • 1772
    #1

    pesky leaks, help!

    Okay, so I've got a situation....

    this 68 classic gasses up, and leaks unless I pull and hold the trigger...when the trigger is pulled, it farts but does not fire. Now I replaced all the orings that I saw that were even slightly worn, and to no avail. Can someone narrow down my problem area for me? I'm not really sure where to look? I've checked the on/off, etc... help! thanks!
    __________________
    Team: Ronin Brotherhood and Ronin Anodizing
    Tags: None
    • olinar
      mech>electro
      • May 2006
      • 1777
      #2
      i dont know what the problem could be since you took care of the valve. make sure the tolerances are straight. check the on/off pin and the sear clevis rod length. i believe its .750 for the pin and 2.125 for the clevis rod

        Comment

        • Coralis
          Hyper Micro
          • Aug 2005
          • 1285
          #3
          turn up the velocity and then see if that takes care of it .... also sounds like you need a power tube oring, if you changed this make sure you put the spacer back in

            Comment

            Previous template Next
            Working...