my warp will not stop spinning. it's broke in ,it's been cleaned,and i have tried to ajust the sensitivity. I have had it for some time now and it has always worked fine. played the other day and it would not stop running.can i hook it up to a hyperframe?
-
-
Are you running a higher voltage battery? When I put a 12v setup in it it spinns like crazy. Does it still pin continuosly when you turn the sensitivity ALL the way down?Originally posted by bisco -
There is a tiny white button on the side of the warp just under the part of the cover that sticks out, check to see if that is stuck being pushed in.Comment
-
the white button is'nt stuck when i push it the wheel speeds up. i took out the 12volt and tried a 9volt. still did not work. someone else told me to try the aa batt. setup. i don't have one.Originally posted by phizzComment
-
still having warpfeed problem
when the sensitivity is all the way down it spins slowly but still spins.Originally posted by TaoLast edited by bisco; 03-28-2007, 09:47 AM.Comment
-
The vibration sensor could be bad or the board itself could also be shot...Comment
Comment