level 10 question

[flashgordon0123]

i installed my level 10 in my mag, and turned the velocity all the way up, and the gun will semi kinda fire, like an 1/8 inch, but then reset, i am running it on like 800 psi so i don't know what the problem is...Any suggestions?

also, how do i get the carrier out of the power tube? it seems stuck

[athomas]

Use the shortest spring to start. Use the largest carrier that doesn't leak. Make sure there are no level 10 shims in the powertube when you make your adjustments.

Use a field strip screw to remove the carrier. Insert the screw down the powertube through the front of the carrier. Tip the screw sideways to exert some pressure against the side of the carrier and pull it out.