My freak kit sucks

[GroovYChickeN 2.o]

[commrad]

never heard of it but if your gona throw it away I'll do some trading or buy it from ya

[georgeyew]

What kind of nubin are you using? I find that if I use the metal ones, I will get more breaks than the plastic ones. Switch to a plastic one to see if that helps.

[BigEvil]

I have a twist lock freak and it works fine. Either you have a lemon or there is something up with your nubbins.

[GroovYChickeN 2.o]

[Chrishew09]

Whisper / Fibur barrels

[robnix]

WWA makes a sweet one piece that takes freak inserts.

[93civiccpe]

The problem here is that ever since Smart Parts sued Airgun Designs and tried to run them out of business, AGD markers have refused to co-operate with the poorly manufactured and low quality products from smart parts.. lol. I always think that having a smart parts product on an AGD or AKA product is just bad karma, and I don't believe in karma..

[GroovYChickeN 2.o]

Only problem is that I have a minimag body, so it has to be twist lock. I wish I have the money to get a ULE body and a DW barrel, but I can't. So it looks like my only option is get another twist lock back right??

[Cow123]

I'm using the rubber ones from agd. When I have an insert in it and you look down the barrel from the back (the twist lock section) to the front you can see a small lip where the insert sits off center. It's almost as if when they machined the back it was set wrong, making the groove for the insert at a slightly different angle than the rest of the barrel.

Mine looks like that down the front. The place I bought from gave me front with a dented lip on the back of the front piece, where the insert goes part inside. Is your back piece dented?

[GroovYChickeN 2.o]

Nah no dents

**EDIT**

http://www.putfile.com/pic.php?img=5132457

Pic of barrel with insert in it. It's really really blurry but you can kinda get a feel for what I'm talking about.

[Badmovies.org]

The problem here is that ever since Smart Parts sued Airgun Designs and tried to run them out of business, AGD markers have refused to co-operate with the poorly manufactured and low quality products from smart parts.. lol. I always think that having a smart parts product on an AGD or AKA product is just bad karma, and I don't believe in karma..

I have to agree, I think that karma is the problem.

[hmudd13]

I had the same problem but it was the tip that caused the ball breaks.
I have several tips but only one did the damage. It looked mint condition. Then one day I set that tip on a table, and it wobbled slightly. It turns out it was slighty bent. The balls were hitting the end on the way out.
Take your end and roll it on a table to see if that's the problem.

[hmudd13]

Only problem is that I have a minimag body, so it has to be twist lock. I wish I have the money to get a ULE body and a DW barrel, but I can't. So it looks like my only option is get another twist lock back right??

http://www.docsmachine.com/ makes adapters to fit Autococker barrels on twistlock mags.

look here...........http://www.docsmachine.com/gear/maggit.html

[automikey]

I'm waiting on 3 of those adapters from Doc, and in the meantime I bought 3 from other sources, so if you want one and can't get through to Doc (you'll see, he's very busy) then PM me.