Q loader using warp parts

[Virndogg]

recently i've decided my next purchase is gonna be a q-loader, in some reviews i read some of the owners said its better if you use a warp hose. so i was wondering if anyone has had any experience with this and if you could help me out with a few other things.
1-should i buy the premium hose and swap it with the q-ldr hose? this hose?
2-should i get this 90 degree adapter if the warp hose is a good idea? (i have a centerfeed) or should i get the sp8 mod kit HERE (recommended by AIC for q-loader use on the RT ULE - my gun)

[Me�iCX]

I run a QLoader set on my ULE and my son's Tac. Both are top centerfeed. The stock QLoader hose is all you need. Don't get the SP8 mod kit, instead get the Ion mod kit. Here are our setups...

QLoaded ULE Automag w/ 14" Stiffi










My son Tylor's QLoaded Tac-One w/ 16" Stiffi

[peeeto]

I run a QLoader set on my ULE and my son's Tac. Both are top centerfeed. The stock QLoader hose is all you need. Don't get the SP8 mod kit, instead get the Ion mod kit. Here are our setups...

[Me�iCX]

Fits like a charm! I put a couple drops of locktite on it to keep it tight but not really needed. I called QLoader to see if they had a mod kit for Tac Ones. I know the Tac/ ULE bodies have angle threaded feednecks and Ions have Impulse threaded feednecks. QLoader said the threads are the same so use the Ion mod kit.

[mbd2]

What about...

What would you need for a warp feed left body? I just ordered the gun and want to put a qloader on it, hence the warp body. I've seen pictures, do I just get the standard kit or do I get one of those mod kits?

[Me�iCX]

What would you need for a warp feed left body? I just ordered the gun and want to put a qloader on it, hence the warp body. I've seen pictures, do I just get the standard kit or do I get one of those mod kits?

You should've gotten a WR body. You can use the Ion mod kit for both WL or WR. With the WL body, your feeder tube will come up over the top. Not a big deal really.

[peeeto]

You should've gotten a WR body. You can use the Ion mod kit for both WL or WR. With the WL body, your feeder tube will come up over the top. Not a big deal really.

to further clarify, the feed tube will have to come over the top if you use the Standard Mounting Socket that comes with the Ion kit.

if you get a Custom Mounting Socket in addition to the Ion kit, you can orient the feeder end to the side that matches your mainbody.

[Me�iCX]

to further clarify, the feed tube will have to come over the top if you use the Standard Mounting Socket that comes with the Ion kit.

if you get a Custom Mounting Socket in addition to the Ion kit, you can orient the feeder end to the side that matches your mainbody.

Thanks peeeto, the CMS slipped my mind and would be a better choice for warp left bodies.