Tac-1 operating pressure

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Deranged Gecko
    Registered User
    • Apr 2007
    • 3

    #1

    Tac-1 operating pressure

    OK, I know it is recommended for about 850 psi pressure, but I need to know if it will still run on 750 psi output (CP tank) without shootdown or chopping.
  • olinar
    mech>electro
    • May 2006
    • 1777

    #2
    itll work fine

    Comment

    • Deranged Gecko
      Registered User
      • Apr 2007
      • 3

      #3
      Originally posted by olinar
      itll work fine
      ok cool, thanks

      Comment

      • athomas
        Of course it works-its AGD
        • Jan 2002
        • 8039

        #4
        With the higher chamber pressure due to the level 10, it just won't recharge quite as fast as if you use 850psi. It'll work fine though.
        Except for the Automag in front, its usually the man behind the equipment that counts.

        Comment

        • Deranged Gecko
          Registered User
          • Apr 2007
          • 3

          #5
          Originally posted by athomas
          With the higher chamber pressure due to the level 10, it just won't recharge quite as fast as if you use 850psi. It'll work fine though.
          alright, but any idea as to how many bps that is until shootdown commences to get me killed?

          Comment

          • athomas
            Of course it works-its AGD
            • Jan 2002
            • 8039

            #6
            I'll probably be higher than what you can pull. A higher pressure helps overcome short stroking due to incomplete trigger cycles. So, if you have good trigger pulling habits, you won't notice any shootdown under normal instances.
            Except for the Automag in front, its usually the man behind the equipment that counts.

            Comment

            Working...