So i got my e-mag on/off to replace my rt one, hoping to fix my problem. i still can't shoot in e-mode, works fine in mech. the hall effect seems to be working (the trigger on/off electric display works) so now what? 
-
-
Charge your battery overnight then check the voltage in the morning. 18.5-20 volts should be the voltmeter reading. -
aye aye captain!
Comment
-
If that dosen't work check your board grounding screw is snug, make shure your plunger rod isn't bent/loose, and clean out your noid with electrical cleaner..Comment
-
solenoid glides freely, made the plunger 3.005+ and charged the battery.
still nothing!!! !!!
Comment
-
anybodyyy?Comment
-
Do you have a voltmeter? You might check the AO threads on emag battery packs. Does the solenoid try to work?Comment
-
it clicks when theres no air in it, but not when i air it upComment
-
and my battery reads 18+ on the voltmeterComment
-
All I can think off....: it won't shoot when you have it on the "on/off" test on the board. It will read on/off" when you pull the trigger but won't fire the gun.Originally posted by yaaaowHuggsComment
-
ooo, i know that. i was just saying thats how i know its not the HES, i try firing in just e-mode and nada. could it be my solenoid? thats all i can really think of... and that sucks!Comment
-
i just need to know if its my noid, thats a pretty easy thing to replace right? just solder 2 wires into the board? if its not my noid, someone PLEASE point me in the right direction!!!Comment
-
sure the safety is off?
Comment
-
Is the magnet in the middle of the trigger to close or to far from the HES? Is it coroded?
edit: Is it in the correct polarity? You can remove the hes and use another magnet to try and activate it. Try both nort and south polesComment
Comment