trade ins?

[The Hellforger]

I was wondering, do rogue, tuna, or agd offer any kind of trade in deals on bolts?

I am getting a minimag soon (it is in the mail as we speak) and in it, it has a lvl7 bolt and it is also coming with a 2nd lvl7 bolt. I want to upgrade to a lvlX bolt, but don't have that kind of cash to drop into it.

any help is appreciated, before you start I don't give a damn about efficiency

[flyingpootang]

Rogue hooked me up with 50 off when I traded in my classic valve towards a Xvalve. Why did you want an X for? If its for reactivity a Emag/RT valve (not RT classic) will drop in and will cost 90-100 with a L10 bolt. Their the same as the X with the exception of being 1/2 stainless 1/2 aluminium. If your going electro your stock classic with a RT on/off and .750 pin will work with just fine. If your looking to lighten your trigger pull just use a RT on/off with a .750 pin about 15.00 used. I tested a classic valve on emag lowers and xmod software on full auto without drop off. Also check out the LCE spydermag convirsion at www.lukescustoms.com Just some options to consider to save some duckets...

[The Hellforger]

what I really wanna do is get one of the Stormwalk frames from Cerberus Innovations. I wanna build a pnuemag so i can rip with it, and to really do that I want a lvlX setup so i don't break **** like crazy. like i said I have the 2 lvl 7's and i wanna step up a notch

[Madmarx]

I think you guys are talking about 2 different things... or I may be reading it wrong.

If your mag has a classic valve with a level 7 bolt then you should be able to find a used level 10 (or LX / Lvl X) bolt on here to upgrade and save a couple dollars. If you're looking to rip with a pnuemag then you'll want the X valve (for the faster recharge rate) w/ a level 10 bolt.

If I'm just totally off here then I appologize.
Otherwise just tryin' to help.

[flyingpootang]

L10 blolts work with all of the valves that I mentioned, but Xvalves do look cooooool.

[Tao]

[QUOTE=flyingpootang]I tested a classic valve on emag lowers and xmod software on full auto without drop off. QUOTE]

What BPS were you doing with the classic valve. Did it have a level 10 aswell?

[maglover728]

I have read somewhere that classic valves will do about 17bps before velocity drop off.

[flyingpootang]

[QUOTE=Tao]

I tested a classic valve on emag lowers and xmod software on full auto without drop off. QUOTE]

What BPS were you doing with the classic valve. Did it have a level 10 aswell?

Did 20 bps without drop off on full with a stock classic valve, RT on/off .750 pin, L10 , halo, & a crossfire 68 4500 high press output tank.