Level ten/ULT question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wjr
    Registered User
    • Feb 2006
    • 995
    #1

    Level ten/ULT question

    I'm trying to tune my x-valve right now. It has a level ten and ULT

    -ULE body
    -X-valve
    -Classic rail
    -very old classic sear
    -cf frame
    -Co2 (I have HPA, just it's not filled right now)

    My problem here is that the gun won't fire at all. Nor does it leak.

    Here's what I've already tried.

    1) I went down carriers. Right now the bolt slides very freely through the spacer.
    2) I'm on the smallest spring.
    3) I ran oil through the valve and on/off
    4) I turned the velocity up as far as it would go
    5) I moved down shims on the ULT

    What else need I do?
    Tags: None
    • flyingpootang
      Magtechian with X disease

      • Dec 2005
      • 2276
      #2
      Xvalves can't run on Co2. You have to use a high pressure output tank .

        Comment

        • phizz
          Registered User

          • Jan 2006
          • 1353
          #3
          did it work with HPA when it was full? might be a problem with the on/off pin, or your sear pin length?

            Comment

            • wjr
              Registered User
              • Feb 2006
              • 995
              #4
              Originally posted by flyingpootang
              Xvalves can't run on Co2. You have to use a high pressure output tank .

              Are you absolutely sure on that? I've tested mags with emag valves on co2 before with no problems.

              And co2 comes out of the tank at 800psi... that's the same as what my HPA tank puts out.

              In response to Phizz's question, I haven't had the chance to test it with HPA yet, and the sear worked on the last mag I owned. I haven't adjusted it since. A visual inspection of the ULT pin tells me nothings wrong with it. Is there anything in particular I should look for?

                Comment

                • Tunaman
                  Specialized AGD Tech

                  • Dec 2000
                  • 8643
                  #5
                  Put the stock on/off back in to get it figured out. Then you will know. CO2 tanks HOLD 800-850 psi. Alot less than that comes out when they get low.
                  Email me for low prices on ALL AGD Products and more. [email protected]
                  Tunamart

                    Comment

                    • Coralis
                      Hyper Micro
                      • Aug 2005
                      • 1285
                      #6
                      does the gun pressurize up when the gas is turned .... in other works does the mag "cock" when the the gun is pressurized ?

                      ah since tuna is on the case ill butt out

                        Comment

                        • wjr
                          Registered User
                          • Feb 2006
                          • 995
                          #7
                          Originally posted by Tunaman
                          Put the stock on/off back in to get it figured out. Then you will know. CO2 tanks HOLD 800-850 psi. Alot less than that comes out when they get low.

                          Hmm... okay. I had a feeling I'd have to do this. Just gotta wait till I get the stock on/off in the mail.

                          And btw, the co2 tank had just been filled.

                            Comment

                            • gibson0822
                              Distraction
                              • Apr 2007
                              • 18
                              #8
                              Any update on this? I'm having the same problem but I'm using HPA, it's on a brand new Tac-One and sometimes mine works but 98% of the time it doesn't.

                                Comment

                                Previous template Next
                                Working...