HPA Question

[Garrett_H]

I recently bought a MacDev LegionAir 45/4500 HPA nitro system. I wanted to make sure that I didn't need to buy anything else before I put on my Automag '68 Classic. The air system has a regulator attached to the tank. Do I need any more gizmos or can I plug it right into the gun? Thanks

[JRingold]

I recently bought a MacDev LegionAir 45/4500 HPA nitro system. I wanted to make sure that I didn't need to buy anything else before I put on my Automag '68 Classic. The air system has a regulator attached to the tank. Do I need any more gizmos or can I plug it right into the gun? Thanks

No gizmos, just airline and fittings.

[Garrett_H]

all right, thanks. Just didn't want to blow the valve or something of the sort.

[Russ]

What is the max output pressure on that Mac Dev?

You'll need at least 600 PSI

[ThePixelGuru]

If it's an HP (high pressure) reg you'll be good, if it's a LP (low pressure) one you'll need another.

[MikeyL]

850

I just picked up a 68/4500 high pressure. The HP reg is 850psi. The HP regs are all black anodized and the LP regs are black with a grey top. At least that's what they told me.