Valve has bad shootdown, HELP

[mwlildude2222]

My mag has very bad shootdown, and i have ths tock valve. The proshop near me says that i need to buy an 8 hole mod, but some people in this forum think that they suck and don't do anything. If anyohe knows what to do, help me out here. Thanks




Gun setup:

Automag Powerfeed chrome body.
Custom Products 14 inch
Shcoktech drop forward
Dye Single trigger frame
Dye sticky Grips

[BlackVCG]

A few things I need to know.

What kind of air tank are you using and how is it attached to the gun?

So I need to know if you have a remote, on/off cradle, etc.

What kind of trigger frame are you using and has the trigger rod been messed with?

If you're using a compressed air system, try another one on your gun and see if it's your tank that is causing the choke in the system.

Report back here and I'll fix this problem for you. I just need to know more information.

Also, do NOT buy the 8-hole mod. It won't do a thing for your gun.

[ciaran.mooney]

If your running Co2, thats your problem just get a cheap air tank. Only a certain level mag needs the 8 hole mod, level 5 or 6, level 7 mags dont need them anymore.

If they guy you asked happens to want to sell you a 8-hole valve, dont bother cos he just wants you to buy a piece of useless crap.

[Ariestsheft]

It may be your reg seat, the same thing happened to me recently and a new reg seat did the trick.

[mwlildude2222]

specs of the gun

I am using co2. I think all my internals are stock. I bought the gun used. It has a dye single trigger frame. The co2 is antisiphon if that makes any differance.

[mwlildude2222]

The co2 is connected through a stainless line, and goes from the duckbill straigh tto the valve. I think that might be why. I am going to buy a nitrogen system pretty soon i think, but i need to know if not having nitrogen is the problem.