another lev 10 woe

[Raligh]

just got my new xvalve yea!!! problem though booo!!! every time i gas it up it shoots about 5 times then nothing. won't fire. i tried changing the carriers and shims no help. oh i got the ul trigger and installed that too if that might be the issue. any suggestions would be much appreciated thx got it finaly figured out i was shootin too hot and added another shim and bingo bonce city and no sticking....
Thanks all you guys for your input it realy got me reaquainted with my mag lol..

[phizz]

maybe try it without the ule in it to narrow down the problem to either the lvl 10 or the ul trigger. Also it almost sounds like the valve is starving from air, check the on/off on your asa to make sure it isn't too tight, sometimes they can cut off the air supply from the tank.

[Raligh]

maybe try it without the ule in it to narrow down the problem to either the lvl 10 or the ul trigger. Also it almost sounds like the valve is starving from air, check the on/off on your asa to make sure it isn't too tight, sometimes they can cut off the air supply from the tank.

tried it and guess what it worked!! well it didn't stop shootin. after every 10 shots or so their was a little his from the valve out the barrel like the lev 10 engauged then it started shootin again. if its the ule what can i do grrrrrrr i'm gonna add another shim to the ule and see if that helps kk put the shim in and couldn't even fit the valve back into the gun!! had to take it back out not not enough air left in my tank to test. man this if freeeeeekin frustrating.

[nevtangle]

If you are getting run-away where the gun is firing multple shots without pulling the trigger then you don't want to add any shims to the ULT you want to start removing them 1 at a time.

[Raligh]

not runaway just stops shooting after 5-20 shots. then have to disconect the air for a sec and reconect for it to shoot again

[Raligh]

tried it and guess what it worked!! well it didn't stop shootin. after every 10 shots or so their was a little his from the valve out the barrel like the lev 10 engauged then it started shootin again. if its the ule what can i do grrrrrrr i'm gonna add another shim to the ule and see if that helps kk put the shim in and couldn't even fit the valve back into the gun!! had to take it back out not not enough air left in my tank to test. man this if freeeeeekin frustrating.

ok i just did some tinkering first of all according to the ule forum 2 shims are suposed to be on the ule trig mine had all 6 right out of the box on also it came with one aditional and a couple of o rings one super small and a larger white one was trying to add the aditional shim thats why i couldn't get the valve in the body. was very careful no bending the pin. so maybe this might shed some light on my plight. any advice would be appreciated

[athomas]

....after every 10 shots or so their was a little his from the valve out the barrel like the lev 10 engauged then it started shootin again.....

Sounds more like bolt stick. Remove the powertube shims and go to the next larger carrier.