Automag Parts

[dt3ft]

Hello,

I wondered if you can tell me sth about my rail:

http://temp.dt3ft.net/temp/minimag/P1050928.JPG

http://temp.dt3ft.net/temp/minimag/P1050930.JPG

http://temp.dt3ft.net/temp/minimag/P1050943.JPG

I've seen pictures of a stock Automag, but this rail doesn't look like it. Do you know what rail this is?

Is there anything else special about this Mag? I know it's got a Venom Highline DLX, Custom Frame and Custom Grips.

Is it possible to find something out about the Mag with the serial number? I especially want to know when this gun was produced, but other information would nice too. Number: MM14912

regards

[dt3ft]

1) That rail started as a stock Automag/MiniMag rail. Someone customized it.

2) The frame is a standard Automag/MiniMag carbon fiber frame with a cut trigger guard that someon replaced with a piece of aluminum(many fields require trigger guards, so this is a band-aid). The grips appear to be something someone molded themselves. Something I havent seen elsewhere. The Hybrid grips are common, but the mold they are in is not.

3) Not really. The serial number can give you an idea that its super old or newer. Not really more than that. The closer it is to 0, the older it is. A MM valve with a 14,000 number was created sometime last decade. It would be older.

2) Jeah, I know. I cut the frame and added the aluminum part.
The grips are also made by me. A friend of me is a luthier. With his tools I cut the shape of the Hybrid grips into the normal grips and glued them into the grips.