Boo-yah frame working... but not really

[ShhBeQuiet9772]

So i have a booyah frame with a mini-morlock board in it. the solenoid clicks and everything but when i hook it up with the x-valve (ult) it wont push the pin for some reason... ive tried replacing the batteries and even different x-valves with and without ult.

if anyone has any clue whats up can u gimme an idea :Z

[maglover728]

The noid is old and weak. That is what happened to my booyah frame.

[ShhBeQuiet9772]

The noid is old and weak. That is what happened to my booyah frame.

where can i get a noid that is new and strong

[maglover728]

This is a good a place as any. you might want to try PBN also. Boo-yah also sold to spyder I believe so look in their forums too. But don't forget to get a second oppinion.

[dizzle]

my hyperframe did the same thing,turned out the i had got ahold of some bad batteries

[flyingpootang]

Make shure you have a gap between your sear leg and noid rod. It needs a gap to build enough speed to push the sear. Its adjusted by moving your noid...