Rt trigger problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cbr600rr
    Wanna race !!
    • May 2006
    • 383
    #1

    Rt trigger problem

    I just bought a Classic Rt splashed red gun, I've just completely tore down the gun & cleaned & oiled it up. After I put it back together it wants to shoot full auto if I really pull the trigger fast, I can though just bounce on the trigger & it shoots fine though. Any idea whats wrong? , Could it be that I used too much gold cup in it, I did put it on the trigger sear & a slight coating on the bolt also.


    Last edited by cbr600rr; 05-20-2007, 08:53 AM.
    Tags: None
    • Coralis
      Hyper Micro
      • Aug 2005
      • 1285
      #2
      If you have a parts kit laying around try changing out the oring in the on/off and see if that helps . Also make sure the previous owner didnt do some modifications like adding level 10 shims to the on/off or sanding down the on/off pin to make it run away like that.

      By the way nice looking mag , I always like that splashed annodizing and chrome.

        Comment

        • cbr600rr
          Wanna race !!
          • May 2006
          • 383
          #3
          Originally posted by Coralis
          If you have a parts kit laying around try changing out the oring in the on/off and see if that helps . Also make sure the previous owner didnt do some modifications like adding level 10 shims to the on/off or sanding down the on/off pin to make it run away like that.

          By the way nice looking mag , I always like that splashed annodizing and chrome.
          There's no shims in it but I'm not sure about the on off pin , I dont have a parts kit but I'm gonna get one & try a valve rebuild & see what happens

            Comment

            Previous template Next
            Working...