2 simple questions

[CTW2]

first question i just put a new from agd x-valve in my used minimag is there a way to warrenty it or because its a new valve in a used marker am i kind of screwed on that one?

second is i also have a back up minimag lol yes i have two of them love them and i am working on building a pump out of it from what i can tell most of what i need is easy to come by or make except one the wave spring you need to replace the bolt bumper with any one know where i can find one or find a substitute for one ?

any input will be helpfull thanks

[maglover728]

"Smalley is the manufacturer. Let me see if I can dig up the link.

Smalley Steel Ring Co. Retaining Rings, Snap Rings and Wave Springs - Index

The wave spring is about 0.93" OD, 0.737" ID with a free height of approximately 0.2" and a compressed (solid) height of approximately 0.04". The spring is made of three turns of 0.094" wide, 0.012" thick strip. The closest match from Smalley appears to be the C100-M1, with specs here: http://www.smalley.com/SpringPropert...artNbr=C100-M1

They changed their site so the link doesn't work anymore, but if you do a search on the part number it will come up."