Alright so I recently tested out a new mag I just purchased works great. However later on in the day playing with my mag I would fire the trigger and it woulid not shoot. I could pull the trigger but no air would launch the ball and so nothing came out. I had no idea what happend. But I turned off my ASA and turned it back on. This allowed the marker to fire again normally however after firing several times again it did it again. I have a New Designz On/Off ASA and a 48ci 4500psi high pressure DXS tank. The ASA does have a bleed function so the air does come out and when I turn the ASA back on it sometimes will shoot once on its own the minute air is received and than I could shoot normally. Is there a problem with my mag or the ASA it self? Much help would be appreciated as I am fairly still new to the mag.
-
-
were you running low on air later in the day?
What was you velocity set at?
-
Bolt stick?stay proud, Stay mechanical!
And my feed back is at: http://www.automags.org/forums/showthread.php?p=1771790#post1771790Comment
-
Definately sounds like bolt stick. Try the next larger carrier for your level 10. Do this with no shims installed.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment