Micromag X-valve issues

[EmmaXR4Ti]

Hi, I just got an X-Valve and installed it on my Micromag, but i noticed that it barely has any reactivity. I want to know if changing the size of the on/off pin would correct this issue or if somebody else can tell me how they set up their Micromag with the X-valve. THX

[Vircolac]

Is it firing? If so, I wouldn't mess with the on/off pin.

What trigger frame are you using? When I put my X-valve in my micro, I had the Benchmark single trigger frame. There was some noticible lightening of the trigger pull, but I always felt that the Benchmark frame was kind of "clunky"; I replaced it with a blade trigger Intelliframe, and that helped.

You might also consider a ULT upgrade kit. This lightens the trigger pull, and I think this made the biggest difference in the reactivity "feel" on my micromag.

[EmmaXR4Ti]

Yes, the marker shoots. I have the original trigger frame on the micromag. Im gonna change the frame to see if it helps.

[luke@york]

try using an adjustable reg and increase the input pressure for increased reactivity, or get an ULT and add a shim extra or so and increase reactivity that way

luke

[maglover728]

Micros do use diffrent length on/off pins. An adjustable tank will help also.

[hockeyhawk77]

Micromag

I use to have a micromag, x-valve, lvl 10, ult, and it worked just fine. Very walkable with the max shims in the ult.