reg valve pin (X-valve)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pierce
    Batteries not needed
    • Nov 2004
    • 217

    #1

    reg valve pin (X-valve)

    What are some of the symptoms if it is not working?
  • pierce
    Batteries not needed
    • Nov 2004
    • 217

    #2

    Comment

    • chill will
      DEATH DEALER
      • Jan 2006
      • 479

      #3
      I have never seen one go bad, but I think they get dirty. Try polishing it off and see if that works, also check your valve to see if its dirty.

      I am guessing that if the valve pin were damaged then you would have spikeing and hissing from the gun. It might be your regulatar seat that is giving you problems..

      Comment

      • pierce
        Batteries not needed
        • Nov 2004
        • 217

        #4
        I'm not having a problem now, i would just like to know what the syptoms are so if it goes bad i know what to look for.

        Comment

        • athomas
          Of course it works-its AGD
          • Jan 2002
          • 8039

          #5
          Inconsistent pressure is a major symptom. Its usually just a dirt problem.
          Except for the Automag in front, its usually the man behind the equipment that counts.

          Comment

          • pierce
            Batteries not needed
            • Nov 2004
            • 217

            #6
            Thanks Athomas, so it's just similer to the valve seat going bad.

            Comment

            Working...