emag/xmag

[divil]

Has anyone put a Predator Morlock board in a emag/xmag?

[Russ]

I use the X Mod. What does a Morlock board do?

[divil]

i got emag lowers without a board. im looking for a new board and the morlock is cheapter then the stock board. http://www.predatorelectronics.com/i...emart&Itemid=1

[flyingpootang]

I wrote this awhile ago:
http://automags.org/forums/showthread.php?t=193084

I'm in the process in putting in a T-board 19.00 & Dye membrane 10.95 into another set of lowers. Damon sadi it would hadle 18 volts without a problem.

http://scenariodreams.com/oscommerce/product_info.php?cPath=15&products_id=66

http://www.scenariodreams.com/oscommerce/product_info.php?products_id=163&osCsid=b612baad087a648eeb96500cc0d969fc

[divil]

I wrote this awhile ago:
http://automags.org/forums/showthread.php?t=193084

I'm in the process in putting in a T-board 19.00 & Dye membrane 10.95 into another set of lowers. Damon sadi it would hadle 18 volts without a problem.

http://scenariodreams.com/oscommerce/product_info.php?cPath=15&products_id=66

http://www.scenariodreams.com/oscomm...96500cc0d969fc

keep me updated on hows it going with the t-board

[athomas]

Morlocks work fine in an emag. Several people have used them including myself.

[divil]

Morlocks work fine in an emag. Several people have used them including myself.

Thanks for all the help

[flyingpootang]

keep me updated on hows it going with the t-board

I'm still waitting on some part prices from Tuna, so it may be awhile...

[divil]

I'm still waitting on some part prices from Tuna, so it may be awhile...

what parts would i need to have to get it to work

[flyingpootang]

what parts would i need to have to get it to work

A board, 22-24awg wire, a glue gun, soldering iron, solder, & flux. I looked at my ULE lowers and I decided not to use the T-Board, because I would have to grind toclose to the noid mounting area. A Pred MiniMorlok will work better, because of its size. (I can take pics later). If you have a set of non-ULE lowers the T-board would workout fine, as long as you want to spend the extra time grinding out the frame (about 1/2 to 1 hour of time & have acess to a Dremel.

[divil]

A board, 22-24awg wire, a glue gun, soldering iron, solder, & flux. I looked at my ULE lowers and I decided not to use the T-Board, because I would have to grind toclose to the noid mounting area. A Pred MiniMorlok will work better, because of its size. (I can take pics later). If you have a set of non-ULE lowers the T-board would workout fine, as long as you want to spend the extra time grinding out the frame (about 1/2 to 1 hour of time & have acess to a Dremel.

Thanks