Minimag Stuck trigger.

[bigboyhutch]

When i put my HPA tank on the trigger wont compress fire or whatever. When tank is off the trigger pulls fine, but like i sated once tank is on its stuck. any suggestions?

[mstrdbz]

Try holding the trigger down while you're putting the air on. Have you recently switched over to HPA?

[bigboyhutch]

i just bought the gun... the guy before me said he used HPA... but no i took the trigger frame/handel off and the little 1/4 bar that holds the trgger mechanism up is gone... well it looks like something went there could that be it?

[mstrdbz]

Probably. That little bar is the sear rod, it allows the sear to pivot. You can find a new one here: http://store.airgun.com/index.cfm?fu...&categoryID=92 and here:http://www.themagsmith.com/store/ind...d&productId=15

AGD and magsmith, respectively. Or you can search around the B/S/T here and you might find one

[bigboyhutch]

Probably. That little bar is the sear rod, it allows the sear to pivot. You can find a new one here: http://store.airgun.com/index.cfm?fu...&categoryID=92 and here:http://www.themagsmith.com/store/ind...d&productId=15

AGD and magsmith, respectively. Or you can search around the B/S/T here and you might find one

well thats what i figured and i have my own "little shop" here at my house and i found the EXACT fit believe it or not. Just tested my gun and it rips.

[mstrdbz]

Cool. Just make sure check it every so often for deformation.