emag conversion help

[varq]

Hi All,

I need some help as this is my first time trying to do this. I purchased emag lowers for my tac-one. I was told that all i need is the emag pin .712. I have the stock on/off and ULT- (ULT can not be used). I looked at the airgun website and noticed that the emag on/off assemble looks different than the stock on/off assembly that the tac one came with (it has some kind of ring on the top). Is my assumption true?

Also i noticed that the emag sear assmbly is not easy to puch with my finger like the RT sear assembly- is that normal?

Is ther anything else I need to purchase?

Thanks all!

A-

[Madmarx]

Emag sears are different.
The on off should be the same with the exception of the pin as you stated.

http://www.airgun.com/downloads/emagexploded.pdf

[Coralis]

that ring is called a quad oring , it is used in an emag because it is supposed to have less friction than the traditional on/off orings. http://store.airgun.com/index.cfm?fu...&categoryID=24

[varq]

do i need this quad ring for the xvalve?

[KC]

do i need this quad ring for the xvalve?

You dont HAVE to have it. A reg O-ring will work.