Installing the ULE trigger need help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • branman444
    Aim Small Miss Small!!!
    • Apr 2002
    • 123
    #1

    Installing the ULE trigger need help

    I am installing the ULE trigger and with any configuration of shims it leaks air. I have the LVL10 X-valve on a calssic Mag no leaks at all shoots like a dream. I need to find a break down of how that thingk is put togather too if i can. It came with a bag that had some extra/replacement parts in it and i dont know where this one little black o-ring went/goes. If someone can help me out with this that would be GREAT!
    Brandon
    Tags: None
    • branman444
      Aim Small Miss Small!!!
      • Apr 2002
      • 123
      #2
      Nobody have any ideas i have oiled it like crazy and still leaks......

        Comment

        • Tao
          Registered User
          • Jan 2006
          • 834
          #3
          Originally posted by branman444
          Nobody have any ideas i have oiled it like crazy and still leaks......
          Where does it leak? Do you have a level 10?

          Check to see if the on/off pin is bent.

            Comment

            • branman444
              Aim Small Miss Small!!!
              • Apr 2002
              • 123
              #4
              Originally posted by Tao
              Where does it leak? Do you have a level 10?

              Check to see if the on/off pin is bent.
              I do have LVL10. It seems to be leaking out the on/off valve. The pen is fine. I have oiled the liven daylights out of it.

                Comment

                • Tao
                  Registered User
                  • Jan 2006
                  • 834
                  #5
                  Originally posted by branman444
                  I do have LVL10. It seems to be leaking out the on/off valve. The pen is fine. I have oiled the liven daylights out of it.
                  leaking out the on/off. so basically if the gun is assempled the air will be comming out the grip frame?

                  Make sure the orings in the ULT are clean, in good shape and lubed. I assume you took the orings out of the bottom of the on/off hole (under your old on/off assembly)?

                  Try gassing up your marker with the trigger held down and see if that changes anything.

                    Comment

                    • branman444
                      Aim Small Miss Small!!!
                      • Apr 2002
                      • 123
                      #6
                      Originally posted by Tao
                      leaking out the on/off. so basically if the gun is assempled the air will be comming out the grip frame?

                      Make sure the orings in the ULT are clean, in good shape and lubed. I assume you took the orings out of the bottom of the on/off hole (under your old on/off assembly)?

                      Try gassing up your marker with the trigger held down and see if that changes anything.

                      Ok found a guy in my area that has a ULE Trigger installed and the little black orint that i couldnt find ot where went well it was the off seal oring. when the trigger is in the off position then it was not sealing up. Put that oring on and BINGO it works like a charm....
                      Brandon

                        Comment

                        Previous template Next
                        Working...