Originally posted by [NA]WARLORD
Tuning your Lvl 10:
Oil your o-ring, put it into the 2.0 carrier (2 lines, no dots), slide it onto the bolt stem and attempt to dangle the bolt (you are holding the carrier while trying this). If the bolt slips off the carrier from its own weight, go to a smaller carrier. Use the largest carrier that will not allow the bolt to slip off using this test. Do not add any shims yet. Oil everything, assemble, and break in the o-ring by shooting out a tank of air. After doing this, you may need to change carriers and use the next smallest. Now, start adding shims one at a time until it leaks down the barrel. Take a shim out. You are ready to go.
You should have got the X Valve, it comes with the LVL 10 included
Oil your o-ring, put it into the 2.0 carrier (2 lines, no dots), slide it onto the bolt stem and attempt to dangle the bolt (you are holding the carrier while trying this). If the bolt slips off the carrier from its own weight, go to a smaller carrier. Use the largest carrier that will not allow the bolt to slip off using this test. Do not add any shims yet. Oil everything, assemble, and break in the o-ring by shooting out a tank of air. After doing this, you may need to change carriers and use the next smallest. Now, start adding shims one at a time until it leaks down the barrel. Take a shim out. You are ready to go.
You should have got the X Valve, it comes with the LVL 10 included
I recently bought a slightly newer mini mag than my old am. I made it a goal to get my 15 year old gun running by myself before I get the x valve for the newer one. Since no one out hear uses these guns, I wanted to know that I'd have a clue before I got the good stuff!
Comment