I have a problem. When I am shooting rapidly, after about 10 balls they start going downward like the pressure is dropping off. Is there anything that I can do about this? Any suggestions would be great. Thanks
-
you can't hang with my z-bodied mag -
How fast are you shooting? The stock AIR will get shootdown after about 10-13 bps. Are you using Co2? N2? Whats your output? Have you checked your Reg seat?"I may be half human, but Im all Woman"
Retro PF Mag
Lvl 10
Intelliframe
DYE 12" aluminum'
KAPP foregrip
68/3k Flatline
KAPP DZ2
1987 VW Scirocco 16v
GOOD TRADERS: Alf, Snakestang
BAD: iNeedaN2tank! -
if its co2, liquids getting into the gun, i would suggest an anti-siphon tube & x-chamber. if your using n2, i would change the reg seat, & make sure the air source is on all the way.Comment
-
I am running compressed air at about 275 fps...i have a retro valve. i'll check the reg seat and see if that's it..thanks....any other suggestions are welcomed.you can't hang with my z-bodied magComment
-
I have heard of recharge rate problems with some low end preset nitro tanks but that should deffinatly not happen to a retroZ-griped, warped, retromag with super bolt, and warpleft polished body, freak kit and flatline 3kComment
-
What type of tank is it?
Are you short stroking the trigger?Did you hear about the new european weapons contracts? France is going to make the wooden sticks Spain making the little white flags
Comment
-
i am using a aci bulldog 2 tank 68 ci 300psi preset at 800 psi...i don't think i am short strokin ityou can't hang with my z-bodied magComment
Comment