MY EPmag progress :) the Ultimate Sleeper

[Ruler_Mark]

Well I just got in my ULT from thotograph and grips so that let me lower my dwell incredabley.

Right now the timing is very very offbut it is good engough for a wow video

Setup:
Standard pnuemag Actuator + luke's piston
WGP LPR
Super Small 3-way: http://www.airsoldier.com:8080/cgi-b...Code=SOLENOIDS
Predator Mini Morrlock 07
X-valve level 10 ULT
Tac 1 rail
Trigger is operating a hidden 25g microswitch

TODO:
2nd detent fromluke
Cut out of alot of metal to fit lpr in trigger frame
Bouncebeam hidden eye (waiting for one to come in)
Battery placement in foregrip 5 x 1/3 AAA's nimh (yes they make thoose)
Hidden board on/off integrated into the stock intelli frame on/off
Wood-Fore grip cover
Magnet for trigger return
Trim all the wires and solderthem so i can take a without grips pic
Macroline will run up through thegrip and out the rail right into the valve
Cut out slots in the rail for battery line, On/off switch, Macroline,Eye
Anno


Video: 20mb

http://www.rscheata.net/pb/epmag/PICT0156.AVI

Note the barrel swabis there cause this is a dorm room

[robnix]

Well I just got in my ULT from trigger walking so that let me lower my dwell incredabley.

Right now the timing is very very offbut it is good engough for a wow video

Setup:
Standard pnuemag Actuator + luke's piston
WGP LPR
Super Small 3-way: http://www.airsoldier.com:8080/cgi-b...Code=SOLENOIDS
Predator Mini Morrlock 07
X-valve level 10 ULT
Tac 1 rail
Trigger is operating a hidden 25g microswitch

TODO:
2nd detent fromluke
Cut out of alot of metal to fit lpr in trigger frame
Bouncebeam hidden eye (waiting for one to come in)
Battery placement in foregrip 5 x 1/3 AAA's nimh (yes they make thoose)
Hidden board on/off integrated into the stock intelli frame on/off
Wood-Fore grip cover
Magnet for trigger return
Trim all the wires and solderthem so i can take a without grips pic
Macroline will run up through thegrip and out the rail right into the valve
Cut out slots in the rail for battery line, On/off switch, Macroline,Eye
Anno


Video: 20mb

http://www.rscheata.net/pb/epmag/PICT0156.AVI

Note the barrel swabis there cause this is a dorm room

How's that solenoid working out for you? Any reliability issues?

[Sumthinwicked]

i know i would catch that as a ref but i know many wouldnt to gj on the mod

[Ruler_Mark]

thanks

[evil]

How's that solenoid working out for you? Any reliability issues?

ive used 2 of those noids so far and they both work great!

[robnix]

ive used 2 of those noids so far and they both work great!

Cool. I'm planning my next project out and needed a solenoid for it.

[outreach]

i wnats one of those solenoids

[Ruler_Mark]

Yea they are surprozeing small ANND I ordered 6 of these http://www.onlybatterypacks.com/show...temID=11411.21

Morrlock needs atleast 3v's to run
Noid runs off of 5v's

6 *1.2 = 7.2v
6 *160mah = 960 mah

A standard9vnimh only has 230 mah so that thing should last forever for that lil noid.


To more than power it, they will fit vertically inside your stock foregrip withroom for the lead wires It will work very nicely and not take up any trigframe space

My batteries should be comming in today

[txaggie08]

No, if you wiring them in series to get 7.2, your only going to get the 160MaH

You would have to wire them in parallel to increase capacity , but would keep the same voltage. Sorry.

[Ruler_Mark]

No, if you wiring them in series to get 7.2, your only going to get the 160MaH

You would have to wire them in parallel to increase capacity , but would keep the same voltage. Sorry.

ahh well now i feel dumb, oh well

[Ruler_Mark]

UPDATE!!!
Yes that is battery lead wires, will have a charge port where the asa has a port
The grip is getting there dam 7.2v rechargeable drill sucks ***


close up with crap camera:


Got my 68/5k (yes 5k) back from C-flag,, and someone wouldnt roll over for a better pic



frame is on its way back from luke cause my tools are limited , along with the body because of a 2nd detent tap

[Thotograph]

I'm sure she is just as thrilled to pieces as you are about your 5k dynaflow system. Press the little flower icon on your camera next time you want to take a close up of something. It'd be a nice picture of the wall in your dorm if that thing wasn't in the way... No the flower icon doesn't mean hippie mode but still...

Seriously though I'm really liking what I'm seeing... can't wait to see this thing come together. As long as you don't "bonus ball me" with it or whatever you were saying to me on aim... Wood is the new trucker mudflap girl grips huh? Glad I could supply you with some inspiration but I never could've expected such ingenuity. Hopefully Luke gets your stuff done in time and you can find a ride to the charity event at OCP this coming weekend. I'll get you back to G-Ville if you can find a ride down aight? Goodluck with the build...

[Ruler_Mark]

can't find the super flexible macroline i was going to use , so now i'm looking into copper hardlines.

In the mean time:


Trigger magnet done
trigger Switch soldering done
e 3way soldering done
Battery foregrip mounting on rail done
batt lines done



Todo:
On/Off Switch off of stock safety, just need to super glue a piece of metal in the a hole drilled on the inside of the safety, then tap 2 holes on the rail to secure the microswitch.
Charger line + connect
Buy some copper hard line + fittings
Route the line through the drop and up into the frame, Y or T fitting to power the lpr then route it up and out the rail to the valve.
mount the board, and 3way in the extra space.
Cover every open connection with liquid eletrical tape
*mabey* black heat shrink the copper tubing
have some fiber optics come off of the led on the board and be wedged between the grips and the frame so output can still be seen.

[Smoothice]

I'm sure she is just as thrilled to pieces as you are about your 5k dynaflow system. Press the little flower icon on your camera next time you want to take a close up of something. It'd be a nice picture of the wall in your dorm if that thing wasn't in the way...

Thats not very nice calling the guys lady friend a THING.

[Ruler_Mark]

heh me n thoto are cool, As to it's progress i got the macro running thorugh the grip and out the rail,, now to hide the lpr.. I mgiht be switching to a lithium batt in the grips and using a pretty cool foregrip i picked up on bst.