Complete ULE Spydermag!

[gunslinger7]

http://www.youtube.com/watch?v=2lKSGLjHxyg

Don't mind the air leaking. This video was shot before I filed the back of the frame to except a bushing, I have gassed it up ever since and it hasn't leaked.

Built, modified, and painted this one with a friend of mine. This is one of our most well done projects.

As of right now I do not have an X valve in there. This mod only works with an x valve with lvl 10 and ULT.

She's for sale if anyone is interested in the Markers Section!

[Dend78]

stellar job on that mag man, looks good and seems to cycle really well

[viper-mayhem]

Can you describe exactly what you did for this mod?

[Lenny]

Can you describe exactly what you did for this mod?

Use search button.

Thanks.

[viper-mayhem]

Use search button.

Thanks.

GOGGED, now go to the Dead Box!

Gunslinger, I'm asking this to know if you have done anything different than Luke's?

[Lenny]

[gunslinger7]

Milled out the frame to accept the reversed noid mod. Then I JB Welded a piece of sheet metal around the sear to extend it to reach the reversed noid.

I can take pics of the internals at a later time if interested.

[luke]

I used a custom made adjustable sear in my conversions..

[luke]

I can take pics of the internals at a later time if interested.

In all fairness and all due respect, this is a "workshop" forum, not an add board for selling your frame.

Added on edit:
Actually I'm a little curious how you did it too.

[viper-mayhem]

That makes two, now let see some pics.

[gunslinger7]

it really basic. I removed the (oh darn whats it called) "pin" with the swivel section from the sear. Then I took some thin sheet metal about 1 3/4" thick and wrapped it around the bottom of the "stripped" sear. Then I filled it with JB Weld to make it more sturdy. As soon as I can get my hands on a digi cam I'll snap a few mugs.



Thanks!

Tom

[luke]

it really basic.

I know!

[Lenny]

it really basic. I removed the (oh darn whats it called) "pin" with the swivel section from the sear. Then I took some thin sheet metal about 1 3/4" thick and wrapped it around the bottom of the "stripped" sear. Then I filled it with JB Weld to make it more sturdy. As soon as I can get my hands on a digi cam I'll snap a few mugs.



Thanks!

Tom

I believe "sear clevis" were the words you were looking for.

Sounds awesome. Can't wait for pics.

[TwilightG]

PICS PICS PICS!

I posted in your sale thread too..
I think a lot of people here are really curious to see how you set that up.

Also, the YouTube video is just too grainy to see the details.. looks like you have a AM/MM rail. I thought there were some fitment problems with that rail? I'd really like to see how you have it setup.

Luke stopped doing conversions a while ago but I'm sure a lot of members would be willing to try this on their own. Share the knowledge



On another note, has anyone ever used the Spyder Rocking trigger frame? While I was searching on this topic yesterday, Luke mentioned doing a conversion with it but I couldn't really find any pics or comments on how well it works.

[luke]

It is the fastest trigger out of all the mods I've done.