pnuemag help

[BSSJackal]

ok , i just got all my parts today. im trying to fit them all into an intelli frame, however they dont seem to fit well. ive already cut the cross peice out of the way (not the one you mount the valve to). i still cant seem to get enough clearance for the valve to close fully.

if anyone her has tried to do this with an itelli frame , please tell me what you did to get everything to fit.

thanks.

[dyeforever]

post a pic of what u mean. if ur using the msv-2 u might need to cut the lever to fit.

[BSSJackal]

ok the lever is up tight against th efront of the frame , and the lower back corner is on the other side of the frame.

i can blow into the hose and the air passes right through like this, so its not closing.

[UDO]

when I did mine I dremeled out a notch where the arm goes another opition is make a bracket to drop it down farther. The higher up the arm your nail is the lighter the trigger pull

[BSSJackal]

have now actually solved that one.

now i just need to figure out what size tap i need for the piston set screws that come with cyberave's kit.

[House of Daggers]

You wouldnt happen to be Jackal from APE, would you?

Good luck with the pneumag.

[BSSJackal]

yes i am

BSS stands for Black Sheep Squad

[Stayhuge]

Hi, the set screws should be 6-32 threads. I belive the drill bit is 7/64. Hope this helps

[BSSJackal]

Hi, the set screws should be 6-32 threads. I belive the drill bit is 7/64. Hope this helps

thanks cyberave contacted me with all the info i needed. now i just ish i hadnt had my little oops today.

[Dirge]

Giving a shot at your oun pneumag eh? You tried mine a few months ago at the Nassau field. I got the bugs worked out. Trigger weight is nothing now.

[BSSJackal]

yes i am. having a couple snags but , i like how the trigger feels.

[Dirge]

It takes a while. I switched my regulator out and am now able to use a ULT. It has made the trigger vastly better. What are you using for a reg?

[BSSJackal]

i dont use a reg, its a mag with an x valve. i have a ULT as well. im using a lpr from a cocker. i am also using a kit from cyberave.

its a ULE custom , with xvalve , lvl 10 , ULT , ULE milled rail , and intelli frame.

thats the whole thing.

[Dirge]

Oops. Worded that badly. I was refering to the LPR. What kind of cocker LPR?

[BSSJackal]