Stock Emag Panel specs question.

[luke]

[DevilMan]

I can work on getting that for ya man... Would take some photos as well, but got no camera right now...

DM

[DevilMan]

1/4, 1/4, 5/16



The length of the screw is 1/4".

The head diameter is 1/4".

The hole in the grip panel is 5/16".

The length is 1/4" as it's measured not from the top of the head but of the threaded parts ONLY as they are supposed to be measured.

Hope it helps,

DM

[luke]

1/4, 1/4, 5/16



The length of the screw is 1/4".

The head diameter is 1/4".

The hole in the grip panel is 5/16".

The length is 1/4" as it's measured not from the top of the head but of the threaded parts ONLY as they are supposed to be measured.

Hope it helps,

DM

Is that measured with calipers or a ruler?

[Looper]

Is that measured with calipers or a ruler?

12" Mitutoyo Digital Vernier

The length of the screw with head is 0.2970, with out head 0.2185
The head diameter is 0.2565
The recess in the grip panel is 0.2615

Darn Machinists.... = Darn Perfectionist....

BTW Nice work on my ETac Project, and I just dropped the trigger and pin in the mail today for you.

[DevilMan]

bwahahhahahaa... It was using my peepers!!!!

No really it was measured... I couldn't find my calipers at the time.



Knew there would be someone with the 1/100,000,000 of an inch measurement in there.

DM

[luke]

Thanks, that's what I needed to know.