wood mag build

[splashkitsrock420]

so i started my first wood mag build with a few friends help........ n diggin for a few parts i want and this is what i came up with so far

wod mag pix

wood mag 2

wood mag 3

wood mag 4

wood mag 5

wood mag 6

wood mag 7

wood mag 9

wood mag 10

so thats what i got so far ...what i need is a trigger group or some kinda set up that will work ...
i got the normal am/mm sear anyone know of where to get ideas on making one or getting one that will work with a lil tune up...?

still a work in progress in starting stages but its fun so far

[LK-13]

Was the Stock Inlet before you started? if yes what was it inlet for?
this will influence the geometry of your trigger group.
how much room do you have between the bottom (outside) of your rail
and the outter surface at the normal possition of a trigger?

uh...
i helped out someone on here that was trying to pick out a drum kit...
was that you?
oops, no it wasn't, just did a search for it
I am a drummer though...
been playing since age 6 and i'm 43 now.
AND BOY ARM MY ARMS TIRED! buh dump bump! Smash!

[splashkitsrock420]

wood mag

im pretty sure it was a 22 ruger i dont know too much about real guns

[splashkitsrock420]

up

can no one else give me some info on where to start building a sear for this marker?

[Porschesales]

i just did a drop in on an M1 garand frame

[jrod]

Here is V1.0 of my trigger setup. I'll get current pics up tomorrow. I have since replaced the homemade trigger with a standard AGD blade trigger. I also added a spring between the sear arm and the screw that connects the rail to the body (near the feed tube). The spring aids in a snappier trigger and resetting the sear.

[Spider-TW]

can no one else give me some info on where to start building a sear for this marker?

Most of the time people use a stock sear and add or subtract from there. I've seen only one thread a couple months ago where a guy made his own sear. He had plenty of metal working tools available.

[splashkitsrock420]

sweet

thanks guys that helps me get started

[Spider-TW]

Here's Flatliner's sear thread.

Search for his original thread if you like, but the thread above is the result.