Help me with my body.....

[blacklegionfreak]

hello,

i just bought this body for my emag

http://cgi.ebay.com/ws/eBayISAPI.dll...m=220450833437

and it needs at hole milled in it to fit =(

any suggestions? ii dont think it will fit on my other mag either =(

please help me

thanks
BLF

[vf-xx]

Not sure I follow.

Why do you think it needs more holes in it? Looks like it was made from a sluggo body, which means you should be able to drop it right in.

[SSP REAPER]

where does it need the hole and for what purpose? It looks likeit should be a bolt on and play kinda deal...

[maniacmechanic]

did you have a twistlock body ?? if you did you just need to remove the twistlock pin , drives out from the bottom to the top

[blacklegionfreak]

thanks

yes thats the problem i have a twist and lock body and the pin is getting in the way
sorry for the not so acurate comunication of my problem, new to automags but lovin em

-BLF

[blacklegionfreak]

maybe

hey

guess what
i got the pin out
but i couldnt get the brass fitting it was int out
any suggestions?

-BLF

[vf-xx]

Screw type C-Clamp and a block of wood.

[blacklegionfreak]

what?

[DevilMan]

For one put the pin/set screw/spring back in.

It will keep you from bending the brass to an unusable shape.

Next... Take a rubber mallet, dead blow, sledgehammer, something heavy and if it's non-marring or at least pretty rigid but not something that will mar the finish should you miss knock the pin out from the BOTTOM to the TOP.

It drops in from the top, so you gotta whack it from the bottom. Some can be quite tough to get out, but with enough persuasion it'll come out.

Anything else??

DM

[blacklegionfreak]

For one put the pin/set screw/spring back in.

It will keep you from bending the brass to an unusable shape.

Next... Take a rubber mallet, dead blow, sledgehammer, something heavy and if it's non-marring or at least pretty rigid but not something that will mar the finish should you miss knock the pin out from the BOTTOM to the TOP.

It drops in from the top, so you gotta whack it from the bottom. Some can be quite tough to get out, but with enough persuasion it'll come out.

Anything else??

DM

ok that makes sense but how do i separate the rail from the frame without breaking it the shaft on the sear? (sorry for the nube questions)

[vf-xx]

ok that makes sense but how do i separate the rail from the frame without breaking it the shaft on the sear? (sorry for the nube questions)

Remove the Sear pin. Should be an allen screw on the right hand side of the rail.

[blacklegionfreak]

thanks for that
also i am going to the garage to get the fitting out
on a separate but slightly related note anyone have a cocker threaded barrel for sale?

[vf-xx]

I"ve got a Warped Sports Dark Lucky 15 set that I can sell you. PM me if interested.

[blacklegionfreak]

I Did It

Thanks For All The Help Guys
I Did It
I Will Put Pics Up As Soon As I Can
Also In The Future I Would Like To Get This Anno'd
Soo Anyone No Any Annoers?

Thanks Sooo Much
-blf

[blacklegionfreak]

Pics

Hey here are the pics

http://s909.photobucket.com/albums/ac299/blacklegionfreak/?action=view&current=ebaypics145.jpg

enjoy thanks for all the help
-BLK