Valve help

[blacklegionfreak]

hey i got another question about mags specifically my emag

first my xvalved automag

when i air it up it works great, but i have to shoot it slowly or it seems that the bolt sticks forward and gas leaks out the barrel. i dont know how to fix this so that it can shoot faster, and work. the asa is leaking a tiny bit could this be affecting the valve?

now for my emag
my emag when it i put it on full auto or any fast setting for that matter, it stutters like the valve is starving for air, and only full shoots one of every 5-7 shots. now the elbow that is connected to the valve is leaking slightly, i will fixe this when i can. bt do you think that is the problem?

this might be the underlining problem or possibly an addition to the problem
i shoot a guerilla air 68/4500 with a myth reg, do you now what the stock high pressure out put is on it? just a thought

i am sorry for all the questions, and thanks for all the help.

-BLF

[Ando]

Can't help you on your emag problem but for your x-valve mag I might be able to.

I had this exact same problems with my mag yesterday. You know how everyone tells you to loosen your field strip screw if you ever have problems shooting...Well get a allen wrench and tighten the hell out of it. Fixed my issues.

[blacklegionfreak]

i will give that a try

Can't help you on your emag problem but for your x-valve mag I might be able to.

I had this exact same problems with my mag yesterday. You know how everyone tells you to loosen your field strip screw if you ever have problems shooting...Well get a allen wrench and tighten the hell out of it. Fixed my issues.

i will try that and get back to you later

[BiNumber3]

stock 4500 myth runs at 600-650psi, not sure exactly, but it's mid-pressure. (their 3k regs are set for high pressure tho, not sure why their 4.5's arent the same)

you have to get a high pressure spring from guerrilla air, not sure if they'll send u one free or not, they might replace it for u if u send the reg in.

[blacklegionfreak]

so thats the problem?

[Ando]

There's a few 2nd gen max flow tanks on sale in the B/S/T area. They go from 0 to 1200 PSI

[BiNumber3]

yesthats most likely the prob, just give guerrilla a call, theyre really great people

[blacklegionfreak]

thanks

ok will do thanks for all the help
=)

[blacklegionfreak]

?

i sent them an email becuase i couldnt find a number do you know where i could get one?

[BiNumber3]

847.640.8857

their tech support

[blacklegionfreak]

thanks

[blacklegionfreak]

and they were very nice =)

[blacklegionfreak]

ok update

switched elbow macro line fitting and now it doesnt leak from it anymore and works in mech mode
i need to get a new 1000 mah battery
and i am ordering the high pressure spring from guerilla air on monday next. thanks yall