Need help with Mag and shocker

[blacklegionfreak]

hey everyone,

1) my emag when aired up wont shoot- it wont even pretend to shoot and i think my battery or charger is going bad.
symptomes: when aire up the bolt clicks forward but the sear rod doesnt reach the trigger and therefore the marker wont fire.

any clues maggers?

2) my shocker (i bought one before i knew of smartparts douchebaggery) it leaks down the barrel. i have taken it apart, made sure it was lubed, replaced most of the o-rings on the bolt rail and bolt, even teched the soleniod. and it still leaks

thank you for your help

Lamar

[DevilMan]

An emag will shoot with no battery if in Mech mode.

The sear when aired up should have about 1/16" gap between the end of it and the back of the trigger. If it don't then adjust it til it does.

Also check to make sure that the safety on the rear of the emag is set to fire and not on safe.

DM

[blacklegionfreak]

i knew they could shoot in both mech and electric mode (thats why i bought one haha)
the safty is off
and how do you adjust it?

[DevilMan]

How much distance is between the back of the trigger and the sear with it aired up?

You have to take it apart to adjust the sear.

DM

[Ando]

Hmm...You might want to do some hard reading before you start messing with your sear. You'll need specialty tools as well to make sure all your dimensions are are set correctly or you'll wind up beating your bolt or sear to death.

One of the easiest things to do first is make sure your battery is putting out enough power. Anything over 18v.

Next is cking the magnet on your trigger, make sure it's set right. Adj it CCW a little at a time and see if it starts firing.

If neither is getting it to shoot. You have 2 choices, start reading or send it in to someone to fix it.

It's best to get it working in Mech mode then in E -Mode.

[blacklegionfreak]

i think this is a project for this weekend haha but i will get back to yall when i do more investigations

[Ando]

What type of shocker do you have? If it's a shoebox it's the 2 orings inside your bolt. Replace them and you should be good. One thing with that is, you'll have to find some thicker orings. The ones they supply are too small for some reason. I might have a few that I found that worked still. I had the same problem before.

[MntlHazrd]

are you trying to fire your emag in mech or electronic mode?

[blacklegionfreak]

What type of shocker do you have? If it's a shoebox it's the 2 orings inside your bolt. Replace them and you should be good. One thing with that is, you'll have to find some thicker orings. The ones they supply are too small for some reason. I might have a few that I found that worked still. I had the same problem before.

its an 03 vision
but could it still have the same problem?

[blacklegionfreak]

are you trying to fire your emag in mech or electronic mode?

i am having battery issues so im only firing in mech mode

[Ando]

I'm not sure what that setup looks like on the 03 vision. Sorry

If you can find a break down of the bolt I could tell you or you could take a pic of it all broken down for me.

[blacklegionfreak]

I'm not sure what that setup looks like on the 03 vision. Sorry

If you can find a break down of the bolt I could tell you or you could take a pic of it all broken down for me.

my camera is broken but than you for offering
do you think it could be that it has been fired so much that the breach cant be air tight anymore?

[Ando]

do you think it could be that it has been fired so much that the breach cant be air tight anymore?

Doubtful but we are talking about Smart Parts...OooOOooOO...IIIIISOOOOOWWWEEENNNNT....TTTH HEEERREEE!!!

All joking aside. I have a pneuV Shocker that's had a good 40+ cases of paint through it and it's still going strong.

[blacklegionfreak]

Doubtful but we are talking about Smart Parts...OooOOooOO...IIIIISOOOOOWWWEEENNNNT....TTTH HEEERREEE!!!

All joking aside. I have a pneuV Shocker that's had a good 40+ cases of paint through it and it's still going strong.

ok than i bet i just need to replace ALL the o-rings in the bolt and bolt rail

[blacklegionfreak]

hey i just charged the battery for a full day and it didnt do squat.