Zap's Cheater.

[longi]

I finally got around to tinkering with this thing in my Mag, it's been installed for a while now but seeing as I haven't played in over a year there wasn't much point in messing around with it. Anyhoo, I'd been a bit dissapointed with it so far so I ran my Dynaflow up to around 900psi and and started to wind the lpr up. First off it bounced all over the place, so I wound it up some more until the ram held the sear in place and stopped it from bouncing. It fires much better now and is really easy to walk. I also have a sear stop fitted, I wound that all the way out too as it really promoted bouncing, then wound it back in just to the point whrere it starts to bounce. It's also the first time i've seen how well the sear stop acually helps to walk the trigger. I'm not sure how quick it cycles at but it's pretty quick. All I need to do now is run some paint through it. Awesome!

[longi]

I used the Cheater for the first time in anger yesterday and was very impressed! It fires quickly enough and crucially, it rarely short strokes. I think I short stroked the valve about 5 times the whole day and using an Ego SL74 barrrel, I was able to shoot through the gloop and carry on playing without having to stop and clean the barrel with a squeegee or swab. I didn't short stroke the valve after dinner indicating I was getting better at walking the trigger. All in all i'm really impressed by the cheater valve, it's far superior to the MSV-1/2+QEV setup of the Pneumag, which I have always felt was let down by the MSV1/2 valve (It just doesn't vent fast enough). I was also using an Emag on/off and not a ULT which I still have to get. Nice one Zap! It's a great bit of kit! Thumbs up from me!