Started my mini gun mag

[hill160881]

I will wait for that area of the gun until i get the barrels spinning.

[Flatliner333]

Dumb question...but you are going to have the main barrel as long as the others correct.
That thing sounds like a lawn mower...and pretty much does the same thing as one to.

[hill160881]

Dumb question...but you are going to have the main barrel as long as the others correct.
That thing sounds like a lawn mower...and pretty much does the same thing as one to.

Yes i found a 21" spyder barrel and will be cutting it down slightly. I am waiting for the adaptor then it will get the final touches. I am worried that the warp motor wont have the balls to get the barrels moving. If that is the case i will have to make a different way to turn the barrels.

[Sandman]

Major kudos from an old school mag shooter.
Completely awesome.
I really want one of these.
Will you publish and sell the plans or consider making more?

[hill160881]

Major kudos from an old school mag shooter.
Completely awesome.
I really want one of these.
Will you publish and sell the plans or consider making more?

Thanks

I have not thought about making more, but it is possible. It has been really easy so far. Basically i just had a plan in my mind and it has been a puzzle from there. It is not even symmetrical. I dont think i even used a tape measure for most of it. All the metal was bent by hand, foot, and a hammer. I will probably put together a how to thread when im done complete with measurements and a list of materials. I wont charge for the plans though, they will just be in the form of a thread here on AO.

[DevilMan]

I really want one of these.
Will you publish and sell the plans or consider making more?

I can't answer FOR him... But if I know Hill at all he'll sell... and he'll make more...

It's all about the $$$$$

DM

[hill160881]

This thing cost like $600 to $700 in materials for a ruff idea of what it would cost to make.

[DevilMan]

This thing cost like $600 to $700 in materials for a ruff idea of what it would cost to make.

X Valve ~> ~$200
ULE Body ~> ~$100
EGO/ETek Frame ~> $??
Tadao Board ~> ~$100
Noid ~> $??

That's just a short list of some of the parts... and notice I didn't put in any time on man hours and such.

DM

[hill160881]

X Valve ~> ~$200
ULE Body ~> ~$100
Shadow rail=$100
EGO/ETek Frame ~ $60
Tadao Board ~> ~$80
Noid ~> Mac 33-$30, SMC-$40
Ram= $30
LPR= $100
Rotor= $100
Other materials= 60

Then Time, so a bit higher than i thought

But i made a deal with the devil to aquire the parts i needed

[koleah]

I can't answer FOR him... But if I know Hill at all he'll sell... and he'll make more...

It's all about the $$$$$

DM

But i made a deal with the devil to aquire the parts i needed

[Automag ReTro]

Major props man, this is quite ridculous! I can't believe how quickly you got it put together. When I said pulling up a chair I thought I was in for a long ride, definately not a few weeks . Where would you be able to use something like this, a scenario game or something similar? Can't imagine a rec field letting you mow down noobies with this .

[hill160881]

Thanks. I try to do my projects quickly so i dont forget a good idea.

I should be able to use it in scenario events and the random rec field that does a big attack and defend.
I can always do something stupid like turn down the rate of fire.

I am currently working on the paint job, getting the barrels to turn, and waiting for the lapco spyder barrel adapter.

[Automag ReTro]

Yeah I guess you could turn the ROF down, but 12bps would be sacrilegious with something like that. You should have a mini PA system or something that yells random battle cries everytime you squeeze the trigger.

"Here comes the BIG DOG!"
"Prepare to meet your maker!"

Things similar to that. Or just a maniacal laugh. MUAHAHAHA!!!!

[hill160881]

Well back to a piece of aluminum for the 90 dagree adaptor from 1/4 pipe thread to 5/8" UNF(thread type of a tank reg). I will have to cut down one of the taps to make it into a bottoming tap, since no one around here has herd of a bottom tap, nor do they carry one.




This is the layout, 1/4 pipe thread in the side and 5/8 UNF out the end. I will remove the brass adaptors and go straight into the adaptor.

[leloup]

Very nice indeed. Have you thought about a sling of some kind? It would make for an easier carry. I couldn't imagine just toting it around the field for an hour.