sleeper with a POPS?

[hill160881]

This is how it has been done in the past.

Flatliner333 posted towards the end of the page with pics of how it was done.

http://www.automags.org/forums/showthread.php?p=2738180#post2738180

[inmylife2415]

i would need the fitting to come off the valve at an angle, to avoid the field strip pin. The frame has a good amount of material that can be removed to fit a line

[hill160881]

i would need the fitting to come off the valve at an angle, to avoid the field strip pin. The frame has a good amount of material that can be removed to fit a line

The screw that holds the valve in place is counter sunk into the rail and installed prior to the air line when assembling the marker. You loose the field strip screw with this mod and have to take the frame off the rail to get the vale out.