need help

[TimberlineShoot]

So I'm working on a custom mag project and need help with a cheap way to get a pump working but mostly I'm looking for a pump handle and the linkage arm. If y'all can help or point me to the right person to talk to that would be great thanks.

[need4reebs]

So I'm working on a custom mag project and need help with a cheap way to get a pump working but mostly I'm looking for a pump handle and the linkage arm. If y'all can help or point me to the right person to talk to that would be great thanks.

well most custom mags or pump mags will fall into the category of cheap. you can try to make your own tho?

what is your definition of cheap?

[TimberlineShoot]

75 or lower I'm already gonna be spending a lot on this but if I could find the technical drawings for the linkage I could end up making my own.

[need4reebs]

75 or lower I'm already gonna be spending a lot on this but if I could find the technical drawings for the linkage I could end up making my own.

ive only seen technical drawings for the milling for the body, rail, and pump rod for the AGD kit. if you have the ability to make your own maybe look into designing it as well? then you can determine how cheap it is?

[Ando]

There's nothing cheep about a pump mag. I think the cheapest kits were done by XMT which he's fallen off the face of the earth. I know rainman just did a run of new kits on MCB which all sold out and I know Cyberave68 selling a tactical Cerberus kit for $175



Not sure if Cyberave68 frquents here but you should be able to get a hold of him on BEO.

http://bigevilonline.com/member.php?u=8

So you know what they look like

[OPBN]

I may have a stock delrin AGD handle if it helps. PM me if interested. Just the handle.

[TimberlineShoot]

I may have a stock delrin AGD handle if it helps. PM me if interested. Just the handle.

If you could send me a pic of the back end of the handle you have I think I'll just design myself a pump handle

[need4reebs]

here are some home brew pump kits:
http://www.mcarterbrown.com/forums/a...cha-think.html
http://www.mcarterbrown.com/forums/c...rappy-mag.html

Spiders pump kit is definitely one of the nicest that i have seen!!!

[TimberlineShoot]

I do agree. I might look into something like that or just make my own out of scratch.

[Spider-TW]

Pretty much anything you hang on polished stainless steel guide rods works great.

On the other hand, Rainman is working on a new run of pump kits. Get your $ ready.

http://www.mcarterbrown.com/forums/r...ts-update.html