Warp to Halo

[mh53eplt]

Has anyone hooked a warp to halo? if so, how did you run the hose?

[Snertz]

Ya

Uh, since the battery hatch on the halo is narrow, I was able to run the hose straight up off the warp with ou having to melt/bend the shells, nor put the warp at an extreme angle, spacing the hopper far from the marker. On my old setup (pic) There was about 3/4in space between the hopper and the grip frame, just enough for my left hand to sneak in.

What I mean:


My hose was left uncut, which is why it loops out front, but you can make it significantly shorter, and thus more or a straight up feed.

[mh53eplt]

appreciate the info.

[Snertz]

Np!

[Dave]

I'm throwing a warp on my halo....and its gonna see some drillin! I'm going for a really tight setup...and when I get done, I'll get some pictures of it up on here

-Dave

[mh53eplt]

During team practice, one of the guys were practicing with had a halo/warp setup on his cocker and was it tight. There is no need to drill, the hose just fits between the Halo and the body. will post mine later tonight when I get it hooked up.

[mh53eplt]

my current setup , still playing around with it to determine what works best.

[Pand0ra]

I did it last year. You can find all the informations with pics and so on in the following there:http://www.automags.org/forums/showt...threadid=51890

@++

[doc_Zox]

Heres my Captains rig:

[alf]

doing the 90* mod to the warp mount bracket is essential to getting a good fit...

the 90* mod is where you drill another hole in the bracket so that it sits at a right angle to the grip

-alf

[-=Squid=-]

I didnt know snypars could have such good guns