Revvie LED Question

[Mega Man]

Is it possible to replace the Red LED powser light with a new one of a different color, in a 12v revvie. I searched for this and someone said they did it but on a 9v revvie, but I tried this on my 12v revvie and I believe the red led is sodered (sp?) into the board. Also if it is possible to exchange lights, is it possible to make it blink every time I fire (I just intellifeeded my mag)? thanks a bunch.....

[shinobidice]

i'm gonna look at that later, whether or not you can replace it or not. You should be able to tap off the intellifeed somehow to make it blink, and if you cant get the battery light off, why not drill out a spot and put in a different hole for one?

[Lopy-slopy]

there's a guy in the dealers forum that says he can do lots of stuff with revies. He especialy mentions adding lights and stuff. Look for it. He charges like 10 bucks or something so it's not costing you much.

[WickeDKlowN]

It's rather simple if you know how to solder and desolder. Just desolder the red one and solder the new one in there.

Edit: and for the intellifeed, it's possible. You would prolly have to rdill another hole and splice it in somewhere.

[BajaBoy]

when i was putting the intell stuff in my old revvy i also put in an extra led that blinked when the motor was spinning. Cool i guess but i found that it take power away from the motor and shorted battery life

[rapidshooter]

i know pnzrfst does those kinds of things here is his thread