warping an e99

[a-ron]

is it posible to put an agd warp on an e99? why can u supposedly only use agd warps on mags ,and proteams for everything else?

[Daroy99]

I dont know about the pt/agd warp thing, but i do know that an e-99 does not shoot fast enough to need a warp. on "13bps full auto" a viewloader 200 feeds my friends and it only chops once or twice......but i fyou want you can get a long house and an adapter.....i forget what its called

[WickeDKlowN]

They both are exactly the same. The only difference is that the PTP ones come with a 90* adapter(that will fit in vert feed tubes.

[Lee]

a guy at the field i go to has a wrped pirahna e-force. it kinda cranks too. warp and revvy cost more than the marker, but what the hey?

[a-ron]

yea the e99 is just an old backup, it was actually my second gun after my compact. it has a check it assault block, and a flat trigger. neways i was thinking of warping my mag, so i wondered if i could transfer it, and the proteams warp is like 60 bucks more? also daroy, the purpose of a warp is not only to crank but it lets u play tighter, most minis and 68s dont rip 20 bps, but alot of them are warped...

[hitech]

I think warping an E99 is a great idea. Then again, I think warping just about anything is a great idea. I've toyed with the idea of warping my Phantom!

You can use the AGD warp. The differences between the AGD warp and PTP warp are:

1. AGD uses plastic 90* adapter. PTP uses an aluminum one.
2. AGD vibration sensor is inside the warp. The PTP one is external and can be mounted closer to the vibration.
3. The PTP mounting plate is more adjustable. You may have to drill holes in the AGD mounting plate (not a big deal, it's just an aluminum plate with holes).

That's it. Go for it!

[ben-afficial]

you can warp a spyder easily...my friend, his brother and dad actually did it.... you just have to dremel the platform for the warp a little so it fits the spyder drop screw holes...but my friend also put a rocker trigger on his spyder so it runs 30 bps so he needs warp any way.

[Duck Hunt]

I dont know about the pt/agd warp thing, but i do know that an e-99 does not shoot fast enough to need a warp. on "13bps full auto" a viewloader 200 feeds my friends and it only chops once or twice......but i fyou want you can get a long house and an adapter.....i forget what its called

Unless you own an Emag or Xmag or are really good and pulling the trigger (like Zman), you probably won't get a classic/mini/RT mag any higher than 13-15 BPS. That being said, a warp feeds around that rate too.

In your frame of logic, using a hopper that feeds SLOWER than your gun is the way to go...

But you NEED a hopper that will feed faster than your gun can fire.

The fact that the warp feeds faster than the Spyder board is irrelavant.

Aron, yes its quite possible. My bro's Electra has a warp on it. If you buy an AGD warp, you'll have to either 1. Drill and tap universal holes in your gripframe (so you can use the plate adapter) OR you can buy a adapter from Palmer ( http://www.palmer-pursuit.com )

thats really the only problem you'll encounter. I'd recommend intellifeeding it to make it completely reliable.

Sean

[BeaverEater]

I think warping an E99 is a great idea. Then again, I think warping just about anything is a great idea. I've toyed with the idea of warping my Phantom!

I believe White Wolf Airsmithing has a warped phantom, it just looks funny

[Duck Hunt]

Punsiher came up with a warp fed electro (i think) phantom that can do 20 BPS.

Sean

[master_alexander]

or you could drill 2 new holes in the warp holder

[txaggie08]

man this is from a ways back.....

[Fathom]

I've seen a warped 98 custom by punisher didn't look half bad either...

<img src="http://tinypic.com/280bch" alt="Image hosted by TinyPic.com">