Questions about Morlock (emagnum) Board???

[redlaser666]

I bought a morlock board to add ACE to a blowback semi (spyder clone), my question is:
What is the diference between high-blocked and low-blocked eye modes?
Im using the transmiter and reciver included in the package in a through breach config.

Thanks for the help.

[robertjuric]

I think it would be what part of the breach the eye is sitting at, either the top or bottom, but Im not sure.


Are you sure the Morlock board will work? Its made to control small solenoids, not the big power hungry sear tripping kind.

[shinobidice]

Isnt that an emag board? the emag solenoid runs off what? 18 volts? And a spyder rusn off what? a 9 volt battery? i dont see why it wouldnt work...

[Matt_mg]

The morlock can take up to 30 volts... enough for anything

[sniper1rfa]

high and low blocked refer to the state of the reciever when the eye is blocked by a ball. High blocked is a reflective type eye, where the reciever goes high when it sees the light reflected from the ball.
Low blocked is a through breech type eye, where the reciever goes low cause is *stops* seeing the light, as the light has been blocked by the ball.


the morlock can handle 5 amps at 30V, it will have NO trouble running an emag. None.

[Matt_mg]

It will also work perfectly in your favorite brand of...

hmm can't say that I'd get moderated

[redlaser666]

Thanks for the replies,
I installed it on the e-frame, and did notice that it didn't have the "punch" of the original board running the same 9.6v battery. It did work with 18v (2 x 9v series conected) so i will be hooking it up to an intelifeed hopper and use the hoppers batteries.

Please keep the comments comming, i will post more as the project develops.

[Matt_mg]

running the batteries from the hopper?

Cool I don't think that's been done before...

[redlaser666]

Nope, everybody seems to want to eliminate hopper bateries
As far as my project goes, the "spyder" is going to become a sort of electro-spider-cocker thing. I was having recocking isues at high rof so decided to build a closed bolt gun instead.

Is there a diferent setting for the eyes in the morlock for closed bolt markers?

[JT2002]

any place where we can still buy these morlock/ emagnum boards?

[sniper1rfa]

https://www.exarin.com

[redlaser666]

Yep, $137 will get one to your door in 1-2 weeks, since they seem to make them when you order them. Mine took 2 weeks to get here.

[la690]

UP
im thinkin about morlocking a spyder so I uped this hopin to learn more about your project.

[joez]

Order it from Docs Machine. Mine was $129 and got here in 4 days.

[la690]

Thanks, I know where to get one.