Help, trigger pull!!!

[beastx4553]

Hey, i want to make my trigger pull lighter!!! what can i do1? i got a minimag with an intelliframe... blade trigger, i'll have pictures within a few days... is there nayway i can make my pull lighter? ...

[jdev]

buy a ULE Trigger when they become available..

which should be soon, seeing as they were just unveiled at IAO

[beastx4553]

but, will that just fit right in my intelliframe? i thoguht i bought this thing for the blade trigger that owned? ... hrmm.. me confused...

[personman]

You can only use the ULE trigger if you have level 10, and a retro valve (or atleast thats what it looks like)
There is no way you can lighten your pull..

[Snertz]

Frame

You could always replace the frame with a Electro frame like the hyperframe, but that cost a bit..

[i_baked_cookies]

you cant make an intelliframe trigger lighter or shorter... oh yea, dont try to adjust the sear pin... it will mess up ur whole gun

[beastx4553]

hrmm.. guess it's a good thing i didnt mess with the sear pin then

[space_weazel_45]

U L E

the way ive read it the ule trig is a on/off assy replacement and will not effect your intelliframe other than lightening the trigger pull DUH!
however you still need one of the fore mentioned valves to make it work and prevent problems

[aut911]

ok ok , i think i need to step in here. ok, if you want something to help trigger pull i have something for you, its called a z valve and ill sell it for 15 bucks. What is it you ask? The z valve is a replacement on off valve that lowers the triggerpull weight of an automagfrom about 7 pounds to about 3. If you dont want to buy a ULT for 50 bucks but still want to lighten your trigger pm me.

aut

[f3rr3+]

^^ LMAO!!!

[buckwheat05]

howdy

howdy

[Benfica4ever]

Originally posted by aut911
ok ok , i think i need to step in here. ok, if you want something to help trigger pull i have something for you, its called a z valve and ill sell it for 15 bucks. What is it you ask? The z valve is a replacement on off valve that lowers the triggerpull weight of an automagfrom about 7 pounds to about 3. If you dont want to buy a ULT for 50 bucks but still want to lighten your trigger pm me.

aut

The trigger pull weight of a classic valve is 3 pounds.........

[aut911]

not on a classic valve my friend. but, trying not to get too technical the valve does definatly lower the trigger pull weight.

aut

[buckwheat05]

yeah a classic valve is 3 pounds

i just tested how many pounds my classic valve was the other day it took exactly 3 so stop tryind 2 rip the kid off by selling him a classic on/off

[the_next_guy_]

the classic valve is 3 lbs. The ULE trigger (a new on/off) brings that down to 15oz. Not bad for $47