I have taken a bunch of old automag and emag parts, ordered a pewter warp ule body and started some custom work with this rail. I am planning on milling the extra jive off of the front where the emag charger would have been at one point and round it to contour to the circular asa. As you can also see, I cut a hole for the asa screw for a tighter lighter setup. I began to strip the paint but I decided to let the powdercoaters do that. In the end It should be amazing... all chrome xcept for the valve barrel and pewter main body.
_But_ I'm still looking for more ideas. Im thinking of cutting slots into the inside of the rail to allow more unneeded weight to drop to the floor. If you have ideas on what else might look cool or custom post back! here are a good amount of pics.
N.A.T.O.
_But_ I'm still looking for more ideas. Im thinking of cutting slots into the inside of the rail to allow more unneeded weight to drop to the floor. If you have ideas on what else might look cool or custom post back! here are a good amount of pics.
N.A.T.O.
Thanks for your interest!
Comment