Aced Emag

[yagrmiestr]

Ok, so yeah, the lvl 10 prevents chops however if you chuff a ball at 20bps full auto it's quite an interruption instead of having the marker wait another 10ms before it fires. Plus now I got a switch! I think it's about time for a re-anno!!!

[MrMag]

dman yagr that is sweet, next time i see you at scp i am gonna need to grope that..................a lot

[yagrmiestr]

MrMag, next bay area ao day you are free to give it a try for a game. However, I've reprogrammed it so it won't fire on me.

Here's a few more pictures since the hardware side of this project is only half the job....



Fully assembled

[ICOM]

thats a nice setup you built

[rpm07]

where did you get the ace and how much are they.

[yagrmiestr]

Originally posted by rpm07
where did you get the ace and how much are they.

They are in the AGD store.

It'll involve milling the rail and body, wiring it up, and writing custom software for the emag board to work with the ace board.

[rpm07]

1 more quick question if I have 2.4 ver. flashed into my board do you know if I would be able just to hook up the ace.
Thanks Mike

[yagrmiestr]

If you wired the ACE the same as the xmag then the xmag software would work. Oh, you'll need a ULE frame as well.

[ignatz]

yagrmiestr - Looks great! Thanks for taking a picture of the milling you did to the ULE body. What size is the hole and where to you drill it (in relation to the body screw hole)?

[yagrmiestr]

Originally posted by ignatz
yagrmiestr - Looks great! Thanks for taking a picture of the milling you did to the ULE body. What size is the hole and where to you drill it (in relation to the body screw hole)?

I'll check the bit size when I get home, I used a tapered bit so I could go little by little. If you look close you will notice that I cut into the circular area that the frame screw threads into. The ACE eye is extremely close to the frame screw. I had to completely mill out the rail where the barrel lock used to be. I can take some closer pictures if need be. I may take my spare rail and the dremeled one to a local machine shop to get a cleaner version, but the dremel didn't do to bad of a job and it's all internal so.....

[rpm07]

If you could get some close pics that would be great

[SomebodySomeoneRTPcf]

DAMMIT IM NOT COOL ENOUGH to know how to do any of this stuff....

[yagrmiestr]

Originally posted by SomebodySomeoneRTPcf
DAMMIT IM NOT COOL ENOUGH to know how to do any of this stuff....

College is your friend.


Here are some close up picts...

[Curly]

Lookin good Jeremy. Ill definitely have to check it out sometime.

[jayloo]

You have inspired me! I too shall have an ace in my emag.