Powervert feed idea?

[Flow_Tech]

sitting in the bed this AM,i got the crazy idea of changing my PF body into a Warp body or a Offset Vert feed..i just thought i might throw this out in the blue for some opionions and thoughts..Let me know

[luke]

[Flow_Tech]

picture a Powerfeed body without the screw holes or the sear holes..and make it so the feed tube is straight up and down,and stick a parabolic feed plug in the bottom,and get a vert elbow for the top,and stick a loader on it,so its like an offset vert feed,or you could do the oppisite and make it into a warp body,by doing the same,just placing the holes in a differnt spot

[luke]

I have approached it a tad bit differently, if you can wait.

[laxkid]

or you could cut off the high rise part to make it a warp and feed it up and put the pf plug on top

[luke]

Yes, you can do that. Just make you get the length correct so the feed plug works right.

[Flow_Tech]

but i want a 1 off body...so far today with the welding gun,ive patched up the underside of the body,so that there is no sear holes,now i just have to bust out the drill press and CnC machine to replace the holes in the correct area

[luke]

hummm, sounds like a lot of work.

[luke]

[Flow_Tech]

Indeed it is SS,got it from one of my dads old interior pieces from his semi...

[luke]

[Flow_Tech]

im not personally welding it my self,im just the commanding officer if you will,i told him my ideas and he said he will do what he can

[luke]

Good luck, I hope it works out....

[Flow_Tech]

i also hope it works out,ill keep you posted on what happens

[Hephaestus]

Couponqueen89 and luke,

Make sure to post some pics OK
I am quite interested in your mods. Each sound quite unique.

Good luck to both!

hephaestus