spyder frame conversion

[SHOCKandAWE]

Is it possible to put an electric spyder frame on an automag? If so, could anyone show pictures of one?

[ramenjames]

no i dont think youy could...hell if you did it would take so much work

the automag sear is diff then the spyder....so youd have to switch that(theirs more youd have to do to i think).....you migh as well buys a ule trigger kit

[SHOCKandAWE]

wut else would u have to do?

[ramenjames]

Originally posted by SHOCKandAWE
wut else would u have to do?

well dude doing the sear thing along would be tons of work
ans you would have to redrill the body of the 'mag so the frame would fit um.....the sear would be tons of work tho
so i would recomend the ule trigger kit it takes the pull down to 15oz and some electros arnt that light (i heard that an angel is 16oz ....not sure tho) the only prob with the ule is short stroking...but learning how to shoot right wouldnt be a problem

go with the ule trigger kit

[ScatterPlot]

If you used a Mako/Boo-Yaah it wouldn't be that hard. They look to me like they use the same frame and internals and everything (I have a Spyder one and a Mag one.) You would need to flip the solenoid around, take out the sear (in the frame), drill out a hole in the top of the frame that I think is already marked, and machine the top to fit flush with the rail. You'd also need a way of extending the back of the thing, since the mag ones are longer. Lastly you'd have to fix all the screw holes. That shouldn't be all that hard, unless you don't have a way to fix the top of the frame. It might not need fixing at all, you'd have to check. Also don't ask me for instructions, what you have there is pretty much all I can give ya. Without doing this myself I don't know if it would work or not. There was some guy on here a few weeks ago wanting to do this with his ELCD, I don't know how that turned out. Now if you're talking about like a Sprint frame or something like that that comes stock on the electrospyders then I don't know if it's possible; probably more trouble than it's worth. Let us know what you decide!