Building first mag

[Team_ILLNatured]

I'm building my first mag, and frankly i don't know what the hell i'm doing...i just finished building my 3rd race cocker, so now i'm lookin for a challenge. I picked up a rightfeed body and a 12in AA for $15, and a complete mini valve for $60...and i'd like to find a used Eframe and Vert ASA for it. and i don't know what i'm doing so any help you guys could hook me up wif would be extremely helpful

[ZyperioN]

um well as for a challenge a mag isnt your best choice

But anyway, i'd grab an Intelliframe from AGD or a Logic Vert Frame from Logicpaintball.com. you also need a body rail, there are a few available. Some of your choices are the stock rail, a ULE rail, Rogue Rail, Logic Rail, or a Omega Rail. Search the forum for more info on the rails. Also you could get a ULE body which would let you use cocker threaded barrels. Then you could get a foregrip or a vertical ASA adapter and your choice of dropforward. Also if your valve does not have level 10 installed you should immeadiately get that. You can contact me on AIM at DrAxXuS91 if you have any more questions.

And finally, Welcome to AO!

[Team_ILLNatured]

so compared to the cockers, the mag is going to be easy??

[ZyperioN]

so easy you'll laugh

[Person]

Just take a cocker, remove the pneumatics, cut the whole body in half horizontally, put a 1 piece valve bolt thingy in the only tube u have left, slap a body rail on there along with a trigger frame, boom, complete..........gotta love agd's perfection :P yeah if your a good cocker user an automag will make you giggle, and wonder "why did i use a cocker" :P

[MagRipper214]

So easy youll get bored and **** yourself

if you want a challenge, try to build a boltless gun
now THAT is hard.

[Blaineikans]

Alright, not to steal the thread but it's a similar question.
Buildin a mag, I know I'll need a body, rail, frame, barrel and valve.
My question is, if I get an x-valve, ule body and either y-grip or intelliframe, am I going to need an RT rail or an Automag rail. And also what other odds and ends am I gonna need in order to make a functional Mag, IE sear tripper, on/off pin and whether they're for AM or RT?