I have a MAKO storm frame for a spyder that works fine except the battery plug is broken; if you hold the wires on the board it works. Anyway I can't put the guts in my mag, because it just trips the sear and resets. (spyder)
I was thinking you could just wire up the switch, capacitor, and solenoid in a simple circuit that would keep the solenoid uh, solenoided when ever the trigger was pulled. That way it would work for a mag, but still be short-stroked. Best way would be rig another board up with a long enough delay to work and eliminaye chuffing, but alas my electronical ability is very small.
Someone tell me why that won't work.
I was thinking you could just wire up the switch, capacitor, and solenoid in a simple circuit that would keep the solenoid uh, solenoided when ever the trigger was pulled. That way it would work for a mag, but still be short-stroked. Best way would be rig another board up with a long enough delay to work and eliminaye chuffing, but alas my electronical ability is very small.
Someone tell me why that won't work.
Comment